Maples And Birch

Bathroom Wood Flooring

It is possible for you to use normal engineered wood flooring in the bathroom (it is not advised to use solid) but it is not easy and can get slippy when wet. The flooring will need to be finished with lacquer or hard wax oil and even with engineered, there is a good possibility the humidity will mean the wood will expand and contract potentially damaging the boards. Laminated flooring also suffers from the same problems.

Our bathroom wood flooring from design parquet comes pre-oiled with a rubber seal that helps with waterproofing and also makes the floor slip-resistant. These Navylam+ flooring products have been specifically designed for use in the room with high humidity and, when installed with the Navylam+ Installation Kit, comes with a 10-year guarantee.

Installation is also made easier with this system. There is no sanding, oiling or joint laying, you simply use the specialist Navycol+ transparent glue to the integrated groove joints on each board and you are done. We suggest using a professional floor installer for the perfect fit but this system is easy enough for a relatively handy amateur to install themselves.

  • Thickness: 9mm
  • Width: 68mm, 88mm or 136mm
  • Length: 400mm to 1200mm

Our SPA OAK hardwood flooring has been specially developed for use in the bathrooms which has enhanced moisture resistance due to the enhanced engineered structure to manage the shrinkage and swelling that of a standard engineered hardwood floor.

We have 3 colour tones within the Spa Oak range has been designed for use in humid conditions, Oak, Smoked Oak and African Oak which allows you to be creative with an inspirational design alternative to stone and ceramic flooring.

  • Thickness: 10mm
  • Wear Layer: 3.5mm Solid Oak
  • Width: 120mm
  • Length: 1000mm
Maples and Birch are a trading division of Kirklees Group companies, 181 to 183 Summer Road Erdington, Birmingham, B23 6DX
0333 533 3330 | [email protected]

Copyright © Kirklees Contracts Ltd